Purair ECO Ductless Fume Hoods
Prod Code: ECO-15/
Green Performance Ductless Fume Hood Series High Efficiency, Cost-Effective, Energy-Saving Design Available with BACnet Networking Protocol Compliant with ASHRAE SSPC 135, Building Automation and Control Network
ECOair™ Controller with Color Display Interface (optional)
Available BACnet Open-Source Interface
Protects the user and the environment
Easy-to-change filters
Improved clamping prevents bypass leakage
Available in 5 standard sizes
Tempered glass sliding sash and side view windows
Sliding sash, manual, standard
Ergonomic arm rest for user comfort
Introduction
The Purair® ECO Series ductless fume hoods are high designed to protect the user and the environment from hazardous vapors generated on the work surface. Central to the ECO Series design is the innovative Multiplex™ Filtration Technology and the exclusive EFT™ Enhanced Filtration Technology developed to assure universal protection in the work environment over the widest rangeof applications in the industry.
Purair® ECO cabinets are available with the optional ECOair™ controller with an open-source BACnet networking protocol for seamless integration with a multitude of building automation and supervisory control, alarm and monitoring functions.
Applications
LEEDS Installations
Capsule Filling
Chemical Sampling
Dental Labs
Drug and Chemical Analysis
Forensics
Histology
Ink fumes
Light Grinding
Pharmaceuticals
Pipetting
Slide Staining
Spray Adhesives
Weighing
Ductless Technology: The ECO friendly choice
Advanced carbon filtration technology offers a safe, high performance alternative to conventional ducted fume hoods for a broad range of applications.
Environmental Benefits Ductless fume hoods isolate and trap chemical vapors to prevent ecological impact through release into the environment.
Versatile Each filtration system is selected for its specific application. The Multiplex Filter broadens the range of applications. Carbon filters are available in more than 14 configurations for use with vapors or organic solvents, acids, mercury, formaldehyde. HEPA/ULPA filters can be added for biological safety.
Easy to Install The ductless fume hood is self-contained and does not require venting to the outside. Many units are portable and may be moved from one location to the next with minimal downtime and without filter changes. Set-up, operation and filter maintenance are straightforward.
Energy Efficient Because filtered air is returned to the room no demands are required of the facility HVAC capacity for make-up air.
Cost Effective Facility ductwork, HVAC and construction costs are eliminated.
Safe to Use Cabinet airflow and face velocity protect users from incidental exposure to fumes.
Self-Testing Electronic airflow monitoring assures continuous safety.
Purair® ECO-20, shown with optional Mobile Base, Modular Utility Package and ECOair™ touchpad controller.
PRODUCT FEATURES:
A. Filter I.D. Window: A strategically placed front cover window shows the installed filter part number and installation date;encourages timely filter replacement.
B. Tempered Glass Side Walls: Clear side panels allow ambient light into the work area and provide a less obstructed view of the work surface.
C. Tempered Glass Siding Sash: When closed, the cabinet sash isolates the air within and protects interior work items from inadvertent external contact.
D. Spillage Tray: A black polypropylene spillage tray is removable for easy cleaning.
E. ECOair™ Touchpad Control Panel (shown): Security access color touch screen controller for set point, monitoring parameters and all operational and safety features.
F. Steel Support Frame: Chemical resistant coating.
G. Electrostatic Pre-Filter: 95.5% effective pre-filter, accessible from inside the work area to contain the release of any trapped particulates.
H. Pass-Thru Ports: For routing electrical cords and instrumentation leads as required.
I. Dynamic Filtration Chamber: Prevents any possible leakage of contaminated air by pressurizing the fan plenum (positive air) and depressurizing the filter compartment (negative air).
J. Stand: Optional stand.
K. Safety Filter: Optional carbon or HEPA/ULPA safety filter adds additional protection.
L. Track and Wheel system: Permits the filter wheels to glide into place on tracks before clamping tightly to the filter gasket; prevents damage during installation and assures filter integrity.
M. Modular Utility Package (Optional).
N. Ergonomic Arm Rest: An ergonomic arm rest improves user comfort and productivity.
OTHER FEATURES:
Smooth Sash Operation: The chain drive sash mechanism is quieter and smoother to operate than conventional counterbalanced design.
Sash Options: Manual sliding sash, standard. Optional motorized sliding sash or manual hinged sash are available; see accessories.
Power Supply: Operates on standard 120V, 60Hz, 1 phase power; other voltages available upon request.
Electronic Gas Detection System: Increases safety, provides four methods for filter monitoring and gas detection.
ECOair™ Controller
The ECOair™ Controller permits easy, intuitive management over the local cabinet. A sequence of color coded displays provides operating status at-a-glance. All setpoints, alarm parameters and other cabinet functions are established through the touchpad Options include the Filter Saturation Alarm, Monitair® Controller or ECOair™ control packages. See Accessories.
The Main menu screen provides all information, set-up and communications protocols. These include fan and lighting ON/OFF functions, access to the on-board filter information library, gas detector selection, set-up, alarms, user security access and networking configurations.
Home screen displays real time face velocity (in FPM or m/s) and gas detection levels at the primary filters.
Home Screen flashes YELLOW background as either face velocity and/or gas detection levels approach within 10% of their respective alarm setpoints.
Home screen flashes RED background and audio alarm starts as either face velocity or gas detection levels hit or surpass their respective alarm setpoints.
ECOair™ Controller with BACnet Control/Alarm/Monitoring
The BACnet operating system was developed under the auspices of ASHRAE as an internationally recognized, open source protocol for building automation. Now used in more than 30 countries worldwide, BACnet offers a universal management solution for optimal energy savings and environmental safety.
While the Purair ECO operates flawlessly in a stand-alone mode with the standard controller, BACnet permits single or multiple cabinets to seamlessly tie-in to a reciprocal building automation protocol for supervisory control and monitoring.
ECOair™ with BACnet allows the building network to monitor individual cabinet on/off status and route alarms to pre-designated addresses to warn of unsafe or dangerous conditions.
Although other competitive systems include supervisory and monitoring functions operating on costly proprietary software platforms, the open-source BACnet solution fully integrates with more than 400 other manufactures to complete a holistic communications network without expensive proprietary programming.
ECOair™ Controller Features
The ECOair™ Controller maintains local supervision of all cabinet functions. The Main Menu screen provides all information, set-up and communications protocols. These include fan and lighting on/off functions, access to the on-board Filter Information Library, gas detector selection, set-up, alarms, user security access and networking configurations.
The controller simultaneously controls and monitors all sensors, systems, alarms and switches including face velocity and gas detection levels.
A color touch screen display is used for security access, set point and cabinet status.
The Home screen is white during normal operating conditions.
If pre-set warning parameters are surpassed for face velocity or gas levels the background will flash yellow to permit users ample time to mitigate the condition and return the system to normal.
If no action is taken and conditions deviate beyond alarm set points the screen background will flash red and an audible alarm will sound.
Concurrently, any emergency protocol programmed into the building alarm system will be activated.
Additionally, a Press for Emergency button can be manually activated to set the unit into alarm mode and initiate the emergency protocol networked into the building alarm system.
Filter maintenance and email notifications for filter re-order, service and waste removal providers can be programmed to initiate automatically through the networking feature.
Electronic Gas Detection System
The Purair ECO ductless fume hood provides four methods for filtration monitoring and gas detection.
The PID analyzer contains an internal wide spectrum reference.
A metal oxide array accommodates for hydrocarbons and VOCs.
An acid array detects acid vapors.
A colorimetric gas sampling port permits manual testing for a wide variety of substances. The front mounted sampling port is positioned for easy access.
The Purair® ECO Series ductless fume hood maintains a constant face velocity of 100 FPM in compliance with USA and international standards for safety and performance. Contaminated air is pulled though the Multiplex filtration system where activated carbon adsorbs chemical vapors; clean air is returned to the room.
The main filter is easy to replace; no tools required. The filter glides in on a wheel and track system, them clamps tightly against the filter gasket to prevent filter tears and to maintain filter integrity.
The Purair® ECO Performance Advantage
Each Purair® ECO fume hood includes features expressed through professional design and certified quality construction. Options and accessories add functional performance to meet specific applications.
Professional Quality
Fume hoods meet or exceed current technical and safety regulations.
Multiplex Filtration
The Multiplex Filter offers a range of options for high performance protection.
Industrial Components
The cabinet frame and work surfaces are durable and chemically resistant.
Reliability
Internal systems are isolated from fumes, extending product life.
Purair® ECO Features and Benefits
Purair® ECO cabinets are available in 4 standard sizes, in metal or optional polypropylene construction.
A high capacity air handling system delivers face velocity of 100 FPM.
The ECOair™ Controller manages all local cabinet functions, set points and alarms.
The BACnet operating system is based on a non-proprietary, open source platform for seamless integration with a building management and supervisory protocol.
The filter assembly is easy to access, easy to change.
Standards & Complaince
Quality Management Systems
ISO 9001
Chemical Fume Containment
ANSI/ASHRAE 110 1995
SAFEBRIDGE Performance Verification (VE)
Carbon Filter Efficiency
BS 7989-2001
SEFA Standard 9
ANFOR NFX 15-211
Biological Safety
Filter Efficiency
HEPA and ULPA
IEST-RP-CC-0034.2
IEST-RP-CC007.1
IEST-RP-CC001-4
EN 1822
Electrical Safety
UL-C-61616A
CE Mark
ROHS Exempt under EEE Category 9
Product Design
ANSI Z 9.5-2003
ANSI Z 9.7-1998
OSHA, Occupational Safety and Health Administration
OSHA Standard -29 CRF, Safety and Health Regulations for General Industry, 1910.1450: Occupational exposure to hazardous chemicals in laboratories. Part B, defi nition, laboratory type hood. These products meet this definition.
Environment
ISO 14001
Energy Star Partner
Education (UK)
CLEAPPS Instruction Approved (EDU)
Dimensions and Shipping Weights
Model Number
Interior, Exterior and Shipping Dimensions
Net Weight Lbs/kg
Ship Weight Lbs/kg
Internal Height
Exterior W x D x H
Shipping W x D x H
ECO-10
38″ 965mm
30″ x 28” 53″
762 x 711 x 1346mm
50″ x 40″ x 42″ 1270 x 1016 x 1067mm
161/73
214/97
ECO-15
39″ x 28 x 53″
990 x 711 x 1346mm
40″ x 50″ x 42″ 1016 x 1270 x 1067mm
193/87
265/120
ECO-20
49″ x 28 x 53″
1244 x 711 x 1346mm
55″ x 60″ x 42″ 1397 x 1524 x 1067mm
276/125
375/169
ECO-25
59″ x 28 x 53″
1498 x 711 x 1346mm
40″ x 67″ x 42″ 1016 x 1702 x 1067mm
305/138
387/175
ECO-30*
69″ x 28” x 53″
1752 x 711 x 1346mm
40″ x 80″ x 42″ 1016 x 2032 x 1067mm
405/183
466/211
Paurair® ECO Series Specifications
Purair ECO Model
ECO-10
ECO-15
ECO-20
ECO-25
ECO-30
Airflow CFM
145
220
295
365
440
Face Velocity FPM
100
100
100
100
100
Lighting
2 x 15 watts
Noise, dBA, 1 meter
<50 <53 <53 <53 <56 Construction White epoxy coated steel frame and head unit. Clear sides and back panel. Polypropylene spill tray. Blower EBM centrifugal fan. Electrical 120V, AC, 60Hz. Other voltages/Hz available. Contact factory for options and specific amperage ratings. Electrical Switches Main On/Off Monitoring Low airflow alarm, standard. Filter Specifications, Quantity ( ) amd Total Weight (lbs, kg) Purair Eco Model ECO-10 ECO-15 ECO-20 ECO-25 ECO-25 Pre-Filter Electrostatic, 1 lbs/ .45 kg (nominal) Main (1) 22 lbs 9.6 kg (1) 22 lbs 9.6 kg (2) 44 lbs 20 kg (2) 44 lbs 20 kg (3) 66 lbs 30 kg Safety Filter, Carbon (1) 11 lbs 5 kg (1) 11 lbs 5 kg (2) 44 lbs 20 kg (2) 44 lbs 20 kg (3) 33 lbs 15 kg Safety Filter, Biological HEPA OR ULPA Options and Accessories Purair ECO Model ECO-10 ECO-15 ECO-20 ECO-25 ECO-30 Order Number HEPA Safety Filter* HEPA and ULPA safety filters for biological safety protection are available for all models. Contact IDEAL for ordering information. ULPA Safety Filter* Filter Saturation Alarm* FSA Monitair® Controller* MON-P ECOAir™ Controller* ECO-P Motorized Sliding Front Sash M-SASH Hinged Front Sash, Manual H-SASH Clear Back Wall C-BACK Base Stand, Mobile, With Casters P10-CART P15-CART P20-CART P25-CART P30-CART Base Stand, level feet, fixed height P10-BASE P15-BASE P20-BASE P25-BASE P30-BASE Base Stand, level feet, telescoping P10-BASE-TT P15-BASE-TT P20-BASE-TT P25-BASE-TT P30-BASE-TT Base Cabinet, Fixed P10-ENCB P15-ENCB P20-ENCB P25-ENCB P30-ENCB ADA Compliance* All Purair-ECO models are available in ADA compliant configurations. Contact IDEAL for ordering information. Polypropylene Construction* ECO-10-PP ECO-15-PP ECO-20-PP ECO-25-PP ECO-30-PP Utility Module* Includes (3) service petcocks and (1) GFCI outlet. Specify left or right hand side mounting when ordering Equipment Rack E-RACK Cup Sink, Mounts into Tray SINK-P Remote Control** RC-P UV Lamp*** UV-15 UV-30 *Factory installed; specify when ordering. **Handheld box connects via cable to head unit. Includes On/Off switch and blower speed control. Can be placed inside work zone. ***Includes UV timer, door micro-switch. UV safety precautions must be followed.
Related Products
Discover more advanced autoclave solutions to meet your sterilization needs with precision, safety, and efficiency.-
Total Exhaust Fume Hood
Prod Code: PTEFH-36-A
+ get a quote -
TAZ 19 Benchtop Fume Adsorber
Prod Code: TAZ 19.100 /IS25283/
+ get a quote -
Small Purair Advanced Ductless Fume Hood
Prod Code: P10-XT-A /
+ get a quote -
Purair Basic Ductless Fume Hoods
Prod Code: P5-36-XT-A/
+ get a quote -
Purair Advanced Ductless Fume Hoods
Prod Code: P20-XT-A/
+ get a quote -
DWS Downflow Workstation
Prod Code: DWS24-A/
+ get a quote -
Ductless Fume Hood EN-14175 / ASHRAE 110
Prod Code: CF-060-PP/CF-090-PP/CF-120-PP/CF-150-PP/CF-180-PP
+ get a quote

Prompt Service Since 1990
24-Hour Support
ISO Certified Since 2007